High Precision Electronic Solid Density Meter Can Connect PC Printer
High precision electronic meter introduction:
The solid density meter is a solid density measuring instrument. It can quickly and conveniently measure the density of solids of various shapes, equipped with special measuring accessories, and a transparent sink. Convenient to carry, simple to operate, powerful, high precision, good repeatability!
Application Scope of high precision electronic meter:
Widely used in rubber, plastics, pipes, plates, wires and cables, cemented carbide, polyurethane, insulation materials, refractory materials, solid boards, PE particles, new materials, solid profiles, foam materials, rubber particles, sponges, foams, Ceramics, powder metallurgy, rock, plastic particles, EVA materials, PU foam, plastic composite materials, polymer materials, graphite materials, glass products, alumina ceramics, zirconia, yttrium oxide, new battery materials, stone and other electrode materials, The density of permanent magnet materials, gold, etc.
Technical parameter of solid electronic meter :
| Model | SP-300A | SP-600A | SP-900A | SP-1200A |
| Weighing range | 0.01-300g | 0.01-600g | 0.01-900g | 0.01-1200g |
| Density accuracy | 0.001g/cm3 | 0.001g/cm3 | 0.001g/cm3 | 0.001g/cm3 |
| Test time | 5-10s | 5-10s | 5-10s | 5-10s |
| Test category | Solids, particles, films, and floating bodies with a density of> 1 or <1 can be tested |
| Display value | Non-absorbent products | Density, volume, volume percentage |
| | Absorbent products | Apparent density, bulk density, wet density, total porosity, effective porosity, open pore volume, total volume, oil content, water absorption |
| | liquid | Density, concentration, baume |
| Compensation setting | Water temperature setting, measuring medium density setting, waterproof treatment medium setting, density upper and lower limit setting |
Features and devices of solid density tester:
·Gold-plated ceramic capacitive sensor;
·With density test device, it can realize the density test of liquid and solid;
·Density direct reading, reducing tedious calculations;
·Standard RS232 data output function, can easily connect PC and printer;
·Fully automatic zero tracking, buzzer alarm, overload alarm function
·The air mass of the tested object: ≥0.25g;
·The buoyancy of the tested object in the air: <-0.125;
·Dimensions, 270*200*265; Weight; 6.5kg
One-piece sink size, 165*115*85
·Blue backlit LCD display;
·The machine adopts an integrated injection molding measuring frame and an integrated injection molding transparent sink, which is easy to assemble, wear-resistant, drop-resistant, and corrosion-resistant, and can clearly observe the sample in the medium.
Standard accessories:
①Main unit, ②Sink, ③Measuring table, ④Tweezers, ⑤Instructions, ⑥weights, ⑦Wind and dustproof cover, ⑧One set of particle measuring accessories, ⑨One set of measuring floating body accessories, ⑩One power transformer
Measurement steps:
①Put the sample into the measuring table, measure the weight in the air, and press the M key to remember.
②The sample is completely immersed in water, measure the weight of the water, press the M key to memory, and directly display the density value
Contact us feel free if you have any special requirement
Product Tags:
|
|
Drop Resistant RS232 10s 900g Solid Density Meter Images
|
